Toshiba 4560 Operator's Manual page 107

Hide thumbs Also See for 4560:
Table of Contents

Advertisement

Control Panel of the MG-2015
Bin Shift Key
Each time you press this key, the sorter bins move one step upward or downward.
Staple Position Indicator
The selected staple position is indicated.
Staple Position Key
Use this key to select the staple position for "manual stapling" or "bypass-feed stapling".
Stapling Start/Stop Key
Press this key to start "manual stapling" or "bypass-feed stapling". If it is pressed while stapling
is in operation, stapling is stopped. The key also flashes when a staple jam occurs.
Add Cartridge Indicator
It comes on when the stapler runs out of staples.
Note: It also lights if the remaining number of staples is 40 or less after stapling is done.
Front Removal Key
Press this key when you want to remove copies toward the front. Only A4 and B5 sized copies
can be removed toward the front.
Multi-Stapling Positions of the MG-2015
When the MG-2015 is attached, you can select the desired staple position from the following three
positions.
Double stapling
Stapled position
Corner stapling
Stapled position
USING THE OPTIONAL SORTERS
Single stapling
Stapled position
105

Advertisement

Table of Contents
loading

Table of Contents