Table of Contents
Advertisement
3. SORT OR STAPLE COPYING (Cont.)
6 6 6 6 6
20 sets of copies will be made.
G After 20 sets of copies finish being made,
message "Return the originals to doc.
feeder input tray" is shown.
Then, return the originals to the original
feed tray.
7 7 7 7 7
Press the PRINT
remaining sets of copies.
Note:If more than 25 originals are set
inadvertently, the first run of 20 sets of
copies is made and/or stapled normally;
however, during the second run, when
the sort bins become full, the copier
stops and displays this message:
Remove paper from
sorter bins
Then, after removing all copies from the
sorter:
G If you selected SORT, press the PRINT
key again to make the remaining
copies and add them to the incomplete
sets of copies.
G If you selected STAPLE, press the
FUNCTION CLEAR
the needed number of copies of the
remaining originals. Add these copies to
the incomplete sets of copies and staple
them manually. (See page 111 for manual
stapling.)
114
key to make the
key and make
Advertisement
Table of Contents
