Table of Contents
Advertisement
PRECAUTIONS
1. PRECAUTIONS FOR INSTALLATION
1 1 1 1 1
The 4560 should be installed by a qualified service technician.
Note: The packing material should be disposed of properly.
2 2 2 2 2
To obtain the best possible results, this machine should be used in conjunction with
a dedicated AC power line at one of the following ratings:
230-240 V, 50/60 Hz, 8 A
Notes:
1. The use of other appliances or other equipment on the same line as this machine may
adversely affect performance and copy quality.
2. Be sure to use a 3-conductor, grounded wall outlet.
3. In areas where a 2-pin plug is used, the machine must be grounded for safety.
Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.
3 3 3 3 3
Select a suitable place for installation. Avoid excessive heat, dust, vibration and direct
sunlight. Also, provide proper ventilation as the copier emits a slight amount of ozone.
4 4 4 4 4
To insure optimal operation, allow clearances of at least 80 cm (32") on the left, 80 cm
(32") on the right and 10 cm (4") in the rear.
When an optional sorter is
*
attached, a distance of
approx. 1m 35 cm is required.
The machine should be located near an easily accessible wall outlet.
When an optional
**
large capacity feeder
is attached, a distance
of approx. 1m is
required.
5
Advertisement
Table of Contents
