Table of Contents
Advertisement
PRECAUTIONS (Cont.)
2. GENERAL PRECAUTIONS
1 1 1 1 1
Handle and use the machine gently and carefully.
G Do not place heavy objects on the copy-receiving tray, original feed tray or sorter.
Caution: Do not push the sorter or put heavy objects on it. Doing so may knock over the sorter
causing personal injury.
G Never allow the power cable to be trampled on or pinched between hard objects, otherwise
an accident or electrical trouble might occur.
G Do not allow any metal things such as paper clips to fall into the machine.
G Periodically check to ensure the power-cord plug is securely inserted in the wall outlet.
G Do not disassemble the copier or try to repair it yourself other than as instructed in this
operator's manual. Call your sales or service representative for all necessary repairs.
Incorrect reassembly can cause electrical hazards and possible damage to the copier.
G Do not touch the fuser area of this copier. This area is very hot.
G Avoid direct viewing of the exposure lights. It is recommended that the original cover or
automatic document feeder be kept closed.
G If you intend to move or relocate this copier, contact your sales or service representative.
Do not attempt to relocate the copier on your own.
G Do not tamper with interlock switches. Interlock switches are provided to ensure that the
copier will not operate with covers opened.
2 2 2 2 2
Be sure to turn OFF the power switch:
G When you leave your office at night.
G If a power failure occurs.
Caution: When turning OFF the power switch, be sure to do so after the machine cycling
has come to a complete stop.
If any paper has misfed in the machine, be sure to remove it before turning OFF the power
switch.
Be sure to disconnect the power-cord plug:
G When you do not intend to use the machine for an extended period of time.
Be sure to turn OFF the power switch, unplug this copier from the wall outlet
immediately and call for service:
G If an unusual noise is heard from the machine.
G If the outside of the machine becomes unusually hot.
G If any part of this copier is damaged, or if it has been dropped.
G If the copier has been exposed to rain or liquid.
3 3 3 3 3
It is recommended that only supplies made or designated by Toshiba be used for the
4560 in order to optimize copy quality. All supplies should be stored in a cool, dry area.
For optimum performance, it is recommended that 80 g/m
quality be used.
Paper of lower quality may contain inherent properties such as excess paper dust and may
lead to premature servicing.
Do not use supplies or cleaning materials for purposes other than what they were intended.
Keep all supplies and materials out of reach of children.
6
2
xerographic bond paper of high
Advertisement
Table of Contents
