Table of Contents
Advertisement
6.7.2 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is at operating temperature.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Engine oil
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
WARNING
Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.
Engine oil extraction
1.
Open shutoff valve(s) in extraction line from engine and waste-oil tank.
2.
Extract all oil from oil pan using the electric pump.
3.
Close shutoff valve(s).
Filling with new engine oil
1.
Determine engine oil change volume for 100 kW/cylinder (→ Page 24) or for 110 kW/cylinder (→ Page 29).
2.
Use electric pump to fill the oil system from the fresh oil tank until the level reaches the "max." mark at oil
dipstick.
3.
Check engine oil level (→ Page 155).
156 | Task Description | MS150122/00E 2015-07
Part No.
Qty.
Advertisement
Table of Contents
