Table of Contents
Advertisement
6.10.5 Mixture coolant – Filling
Preconditions
☑ Engine is stopped and starting disabled.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Mixture coolant
WARNING
Coolant is hot and under pressure.
Risk of injury and scalding!
• Let the engine cool down.
• Wear protective clothing, gloves, and goggles / safety mask.
NOTICE
Cold coolant in hot engine can cause thermal stress.
Possible formation of cracks in the engine!
• Fill / top up coolant only into cold engine.
Filling engine coolant
1.
Fill prepared coolant with pressure pump until system filling pressure for 100 kW/cylinder (→ Page 24) or for
110 kW/cylinder (→ Page 29) has been reached.
2.
Vent mixture coolant circuit via plant.
3.
Start the engine and operate it at idle speed for some minutes.
4.
Check coolant level (→ Page 164).
168 | Task Description | MS150122/00E 2015-07
Part No.
Qty.
Advertisement
Table of Contents
