Table of Contents
Advertisement
8.13 Lube Oil System, Lube Oil Circuit
8.13.1 Engine oil – Change
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is at operating temperature.
☑ MTU Fluids and Lubricants Specifications (A001061/..) are available.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 60–320 Nm
Ratchet bit
Engine oil
Sealing ring
WARNING
Oil is hot.
Oil can contain residue/substances which are harmful to health.
Risk of injury and poisoning!
• Allow the product to cool to below 50 °C before beginning work.
• Wear protective clothing, protective gloves and goggles/safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
NOTICE
Inadequate oil pressure during the engine start sequence following an engine oil change or an engine oil
filter replacement.
Risk of severe engine damage!
• Make sure the quick-start function is deactivated before starting the engine.
• For engines with lube oil priming pump: Prime the engine for 20 seconds at a pressure of at least
0.3 bar.
Draining oil at drain plugs on oil pan
1.
Provide a suitable container in which to collect the engine oil.
282 | Lube Oil System, Lube Oil Circuit | MS15038/01E 2018-11
Part No.
F30452768
F30027341
(→ Spare Parts Catalog)
Qty.
1
1
Advertisement
Table of Contents
