Table of Contents
Advertisement
1.4510.206 – Knock Sensor Error B5
Red alarm. Initiated by antiknock control.
Cause
No signal from this knock sensor.
1.4510.207 – Knock Sensor Error B6
Red alarm. Initiated by antiknock control.
Cause
No signal from this knock sensor.
1.4510.208 – Knock Sensor Error B7
Red alarm. Initiated by antiknock control.
Cause
No signal from this knock sensor.
1.4510.209 – Knock Sensor Error B8
Red alarm. Initiated by antiknock control.
Cause
No signal from this knock sensor.
1.4510.210 – Knock Sensor Error B9
Red alarm. Initiated by antiknock control.
Cause
No signal from this knock sensor.
1.4510.211 – Knock Sensor Error B10
Red alarm. Initiated by antiknock control.
Cause
No signal from this knock sensor.
1.4520.232 – Error Missing Ring Gear Signal
Red alarm. Initiated by IC922.
Cause
Crankshaft signal missing.
78 | Troubleshooting | MS150122/00E 2015-07
Corrective action
1. Check cabling.
2. Check sensor (tightening torque, damage), replace as necessary.
Corrective action
1. Check cabling.
2. Check sensor (tightening torque, damage), replace as necessary.
Corrective action
1. Check cabling.
2. Check sensor (tightening torque, damage), replace as necessary.
Corrective action
1. Check cabling.
2. Check sensor (tightening torque, damage), replace as necessary.
Corrective action
1. Check cabling.
2. Check sensor (tightening torque, damage), replace as necessary.
Corrective action
1. Check cabling.
2. Check sensor (tightening torque, damage), replace as necessary.
Corrective action
u Check sensor, sensor distance and cabling; replace if necessary.
Advertisement
Table of Contents
