One-touch memory
14
One-touch memory telephone
numbers can be a maximum of 32
digits.
If you enter more than 32 digits
you will hear an error tone and the
number entered will not be saved.
If you wish to cancel storing a
number, replace the handset on
the base or press
storing process will be cancelled
and any number that was previously
stored will be retained.
*Need some help? Call 02 4574 8888 or go to www.oricom.com.au
One-touch memory
You can store 3 of your most important telephone numbers
under the one-touch memory buttons
and
one-touch memory buttons so you can make a note of the
number or contact associated with the number you have
stored. You'll need to lift the plastic plate up so you can write
on the card.
. The
Store a one-touch number
1. Lift the handset or press
2. Press and hold the
a confirmation tone is heard, then release.
3. Press a button to assign a number: M1
M2
be heard.
4. Dial the number you want to store.
5. Press and release the
tone will be heard.
6. Replace the handset.
. There is a memory card located above the
QUICK DIAL
or M3
. A confirmation tone will
QUICK DIAL
,
.
button for 2 seconds until
,
button. A confirmation