Miele H6160B Operating And Installation Instructions page 105

Problem
No water is being taken
in with the Moisture Plus
d function.
A noise can be heard
after a cooking process.
The oven has switched
itself off.
Rust-like spots appear
on catalytic surfaces.
Possible cause and remedy
Demo mode is activated.
The oven can be operated but the pump for the steam
injection system does not work.
^ Deactivate Demo mode (see "Settings – P 8").
The pump for the steam injection system is faulty.
^ Call Miele.
The cooling fan is switched on.
When the temperature in the oven has fallen sufficiently,
the cooling fan will switch off automatically.
The oven will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a cooking
programme.
^ Switch the oven back on.
The catalytic cleaning process does not remove spices,
sugar and similar deposits.
^ Take catalytic panels out of the oven and remove this
type of soiling with a mild solution of hot water and
washing-up liquid applied with a soft brush (see
"Cleaning and care - Cleaning the catalytic back
panel").
Problem solving guide
105