Gree TERRA09HP230V1A Installation, Service & Troubleshooting page 127

24,000 btuh Warning - Wait 10 minutes after power is disconnected before starting disassembly.
10. Remove motor and support
Remove the screws holding the motor, remove wire terminals,
then remove the motor. Remove the screws holding the motor
support, then remove the motor support
Motor
11. Remove 4-way valve
Properly remove the refrigerant, unsolder the pipes from the valve
assembly.
4-way valve
Disassembly of Outdoor Unit, continued
12. Remove gas and liquid valves
Remove the screws holding the valve sub-assembly. Remove any
refrigerant in system. Wrap valve to prevent damage from heat.
Unsolder the pipes from the valve, then remove valves.
13. Remove compressor
Remove bolts from feet of compressor, then remove compressor
Motor support
14. Remove isolation sheet
Remove the screws holding the isolation sheet from the condens-
er and chassis, then remove sheet
Gas valve
Liquid valve
Compressor
Isolation sheet
127