Gree TERRA09HP230V1A Installation, Service & Troubleshooting page 116

Disassembly of Indoor Unit
24,000 btuh Warning - Wait 10 minutes after power is disconnected before starting disassembly.
8. Remove evaporator sub-assembly
Step 1. Remove the clamps connecting the water
tray and chassis, then remove the water tray.
Step 2. Remove the screws holding the tubing
clamp, then remove the clamp.
Pipe clamp
Step 3. Remove the screws holding the evapora-
tor sub-assembly, slightly reposition the tubing to
remove the evaporator.
Screw
116