Gree TERRA09HP230V1A Installation, Service & Troubleshooting page 123

18,000 btuh Warning - Wait 10 minutes after power is disconnected before starting disassembly.
6. Remove fan blade
Remove the bolt holding the blade then remove.
Fan Blade
7. Remove electrical box assembly
Unplug the wire terminals of the compressor, motor, capaci-
tor and reactor. Remove the bonding and ground screws, then
remove screws holding box and remove box. Remove the screws
holding the fire retardant box and remove,
Disassembly of Outdoor Unit
Electrical Box
Fire retardant
electrical box
8. Remove sound proof barrier
Carefully remove barrier
Barrier
9. Remove isolation sheet
Remove screws holding sheet, then remove sheet
Reactor
Capacitor
10. Remove refrigerant valves
Properly remove refrigerant. Protect valve assembly by wrapping
valves with wet cloth, unsolder valves, then remove screws hold-
ing support. Remove screws holding valves, then remove valves.
Isolation sheet
Valve
123