Gree TERRA09HP230V1A Installation, Service & Troubleshooting page 124

18,000 btuh Warning - Wait 10 minutes after power is disconnected before starting disassembly.
11. Remove 4-way valve
Properly remove refrigerant charge, then remove valve by heating
brazed joints and withdrawing pipe from valve.
12. Remove compressor
Remove the three screws holding the compressor.
13. Remove fan motor and support
Remove the 4 screws holding the motor, remove wire connector,
then remove the two screws holding the motor support bracket
Fan Motor
124
Disassembly of Outdoor Unit
4-way Valve
Compressor
Washers
Motor support
14. Remove condenser
Remove the screws holding the condenser assembly and chassis,
then lift and remove
Condenser
Chassis