Gree TERRA09HP230V1A Installation, Service & Troubleshooting page 118

Disassembly of Indoor Unit
24,000 btuh Warning - Wait 10 minutes after power is disconnected before starting disassembly.
9. Remove indoor fan blade and motor, cont.
Screws
Step 1. Remove the two screws holding the step
motor and remove the step motor.
Step 2. Remove the screws holding the cross flow
blade and motor.
Step 3. Remove the motor sub-assembly.
Cross blow blade
Motor
Step 4. Pull out the plug of ring bearing.
Ring of bearing
118