Gree TERRA09HP230V1A Installation, Service & Troubleshooting page 22

System Operation 9,000/12,000 btuh Models, cont.
Other Controls
1)On/Off
The on-off state will change with each button press.
2)Mode Selection
Press the "Mode" button to change from Auto, Cool, Dry, Fan or Hesat Pump
3)Temperature Setting
Each time you press the "TEMP+" or "TEMP-" button the temperature setting will change by 10 F. The temperature range
is 60.80 F - 860 F. In Auto Mode this button will not function.
4)Time Switch
The unit will stop and start by setting the Timer on the remote controller.
5)Energy Savings Mode
In heating mode, refer to the Cold Air Prevention explained in the (3)Heating Mode process .
In cooling mode, the fan speed will adjust according to the fan speed curve below:
880 F
T + 30 F
preset
T + 10 F
preset
Fan Speed
22
Product Introduction
(Press Temp & Clock simultaneously, display will indicate "SE")
T
amb.
Turbo
High Med. Low