V100A Primary Functions; Upper Screen Modes - Vetta V100A Manual

V100A PRIMARY FUNCTIONS

UPPER SCREEN MODES

Ride Time and Total Time functions are shown
simultaneously. Ride Time (RT ) measures
actual riding time and starts automatically
when the timers are set to "0:00:00" and the
wheel rotates. Total Time (TT) shows the total
elapsed trip time from start to finish. Like RT, TT
starts automatically when the wheel rotates
ONLY when the timers are set to "0:00:00", or
it can be started manually by pressing Button
#3 in the RT/TT screen mode ONLY. TT can only
be stopped manually by momentarily pressing
Button #3 in the RT/TT screen mode at the end
of a ride. To reset both RT and TT to zero, turn
the timers off and press Button #3 for at least 2
SPEED
TRIP DISTANCE
SPD displays the current Speed and is updated
continuously. DST displays the current Trip
Distance and automatically resets after the
maximum trip distance (999.9) is achieved.
Trip distance is displayed in the SPD/DST
screen mode and starts automatically when the
wheel rotates and TT Timer is active. Reset
DST to zero by pressing Button #3 for 2
seconds with the timers turned off in any
screen mode except STP/ID or STP/IA.
RIDE TIME
TOTAL TIME
SPD
DST
RT
TT