Speed* Cadence; Lower Screen Modes; Altitude Percent Grade - Vetta V100A Manual

LOWER SCREEN MODES

SPEED*
CADENCE*
When installed, the Cadence kit measures and
displays pedal Cadence in Revolutions Per
Minute (RPM). The SPD/CAD screen function
letters appear ONLY when the Cadence
hardware is installed and a Cadence signal
received by the head unit. After a current ride
data reset, (Button #3 for 2 seconds with the
timers off ) the function letters will disappear,
but they will come back on with the next
Cadence input. Note: RT and TT timers
MUST be activated in order for Speed and
Cadence to function.
*(optional)
ALTITUDE
PERCENT GRADE
In the ALT/% screen mode, current Altitude is
displayed in feet (ft) or meters (m) on the
upper line. The lower line shows the current
Percent Grade (%) of the road or trail that you
are on: either uphill, as indicated by a whole
number, or downhill, indicated by a number
preceded by a minus sign (-). Note: A
secondary screen that displays your
Maximum % upgrade (climbing) and
Maximum % downgrade (descending) can be
displayed by pressing Button #1 for 2 seconds
in the ALT/% screen mode.
SPD
CAD
ALT
%