Vetta V100A Manual page 33

SETUP: TEMPERATURE UNITS
A highlighted thermometer icon indicates
that the computer is in the Temperature
Setup screen mode. The flashing "F" indicates
Fahrenheit. To choose temperature readings
that are displayed in the Fahrenheit scale,
press Button #1 to select it and advance. To
select the Celsius scale, press Button #2 to scroll
to a flashing "C". Then press Button #1 to select
and advance.
SETUP: CLOCK
The V100A clock displays time in either a 12 or
24 hour format. A "PM" indicator appears only in
the 12hr format. To select a format and set the
current time, proceed as follows:
Step 1: Use Button #2 to toggle between the
two time formats (the numbers will
flash).
Press Button #1 to select the desired
Step 2:
time format and advance to the
Clock Setup screen with the left hours
digits flashing.
To set the current time, press Button #2 to
Step 3:
advance the flashing digit, then press
Button #1 to select it and advance
to the next flashing digit.
Step 4: Repeat this procedure for each digit
until the correct time is set in hours
and minutes, then press Button #1
again to select and advance. Note:
Although there is only one clock time,
either time format-12 or 24 hour-can be
set for bikes I and II.