1. Manuals
  2. Brands
  3. Vetta Manuals
  4. Bicycle Accessories
  5. VL110A
  6. Manual

Vetta VL110A Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INTRODUCTION ..............................................................
WARNINGS & CAUTIONS ..............................................
FUNCTIONS / FEATURES ..............................................
VL110A ILLUSTRATIONS ...............................................
HEAD UNIT ................................................................
COMPONENTS .........................................................
BUTTON FUNCTIONS .....................................................
SETUP & PROGRAMMING .............................................
INITIAL SETUP ..........................................................
System Check .....................................................
NOM Setup ................................................................
Setup: Dual Bike ..................................................
Setup: Altitude Units ............................................
Setup: Altimeter ON/OFF ....................................
Setup: Altimeter Memory 1 ..................................
Setup: Altimeter Memory 2 ..................................
Setup: Wheel Circumference ..............................
1
Setup: Service Timer ...........................................
1
Setup: Speed Units .............................................
2
Setup: Temperature Units ....................................
3
Setup: Clock ........................................................
3
Setup: Odometer .................................................
4
Setup: SmartLite ON/OFF ...................................
5
Setup: SmartLite Interval - From ........................
7
Setup: SmartLite Interval - To .............................
8
Exit ......................................................................
10
System Check .....................................................
10
PRIMARY SCREEN MODES ...........................................
10
UPPER SCREEN MODES .........................................
10
SPD/DST .............................................................
11
RT/TT ..................................................................
11
AVG/MAX ............................................................
12
SPD*/CAD* ..........................................................
12
LOWER SCREEN MODES ........................................
13
SPD/ALT ..............................................................
13
ENGLISH
CONTENTS
15
16
16
16
17
17
18
18
18
19
20
20
20
21
22
22
23
23
I

Advertisement

Table of Contents
loading

Related Manuals for Vetta VL110A

Summary of Contents for Vetta VL110A

  • Page 1: Table Of Contents

    INTRODUCTION .............. Setup: Service Timer ........... WARNINGS & CAUTIONS ..........Setup: Speed Units ..........FUNCTIONS / FEATURES ..........Setup: Temperature Units ........VL110A ILLUSTRATIONS ..........Setup: Clock ............HEAD UNIT ..............Setup: Odometer ..........COMPONENTS ............Setup: SmartLite ON/OFF ........
  • Page 2 ENGLISH CONTENTS PRE-RIDE ALTIMETER CALIBRATION ..DUAL BIKE MEMORY ........TOT ALT/MAX ALT ..........SERVICE TIMER ..........CLK/ODO ............SPEED COMPARATOR ........SPD/TMP ............LOW BATTERY WARNING ....... STP/ID ..............FREEZE FRAME MEMORY ......RESET ..............STP/IA ..............SECONDARY SCREEN MODES ........RIDE DATA RESET ...........

  • Page 3: Introduction

    Thank you for purchasing a Vetta VL110A cycle computer. Please take time to familiarize yourself with all the functions of the VL110A model so you can take full advantage of its programs. And don’t forget to store this manual in a safe place for future reference! WARNINGS &...

  • Page 4: Functions / Features

    FUNCTIONS / FEATURES Smart Signal Total Time ● ● ● ● Current / Average / Maximum Speed Service Timer ● ● ● ● ● ● Speed Comparator Ambient Temperature ● ● ● ● ● ● Cumulative Odometer Maximum / Minimum Temperature ●...

  • Page 5: Vl110A Illustrations

    VL110A ILLUSTRATIONS HEAD UNIT...

  • Page 6: Components

    COMPONENTS CR 2450 For All Models For VL110A HD For VL110A WL For VL110A T2X Bladed Spoke Magnet (SPD Magnet) Wired Speed Sensor with WL Wireless Speed Transmitter Integrated T2X Torpedo Spacer Mounting Bracket WL Wireless Speed Active Mount Integrated T2X Active Mount...

  • Page 7: Button Functions

    BUTTON FUNCTIONS SETUP MODE Button Sets digits or units Advances to the next item, screen or setting mode Button Advances digits or toggles through units Hold for fast advance Resets RT to zero for Service Timer Button Has no function in Initial Setup Button Button Turn on the NiteLite for 3 seconds...
  • Page 8 OPERATING MODE Button Starts/stops RT/TT timers and Stopwatch Reset RT/TT timers and other ride data to zero Exits NOM Setup and advances to NOM System Check and SPD/DST Mode Button Turn on the NiteLite for 3 seconds Button & (simultaneously for 2 seconds with RT/TT Timers are off) : Hold both in the SPD/DST Mode to enter NOM Setup Button Button...

  • Page 9: Screen Display Sequence: Bi-Level Memory

    SCREEN DISPLAY SEQUENCE: BI-LEVEL MEMORY SPD* Upper Screen Mode Altimeter and Barometric Pressure Unit Symbols Upper Display Temperature Icon Lower Display Service Timer/ Low Battery Icon Lower Screen Mode Stopwatch Icon Bicycle Icon Speed Comparator Symbol Remark: ( * ) Available until Upgrade to T2X model...

  • Page 10: How To Recognize Your Torpedo (T2X Model Only)

    HOW TO RECOGNIZE YOUR INTEGRATED T2X TORPEDO (T2X MODEL ONLY) 1. For VL110A T2X or Upgrade to T2X models, your computer can ONLY recognize the Integrated T2X Torpedo after it goes through the ID Learning procedure. 2. If your Integrated T2X Torpedo is purchased as a complete set with the VL110A series computer, your computer has been programmed to recognize the Torpedo in the factory.
  • Page 11 ID LEARNING PROCEDURE Step 1: Install the computer on the Integrated T2X Active Mount. Step 2: After the screen display “id NEEd”, press & hold the Torpedo’s button for 3 seconds.The Light Ring Indicator of the Torpedo will turn on for 2 seconds in red. Step 3: During the process, the computer will display “id LEArn”...

  • Page 12: Setup & Programming

    SETUP & PROGRAMMING INITIAL SETUP The computer will automatically go into the Initial Setup Mode after 1. New battery repalcement, or 2. All Clear Total Reset In the Initial Setup, riders can program the Basic Settings for the computer, the content of settings are same as NOM Setup for Basic Setting (see page 11, Section of NOM Setup for Basic Setting) Important To change any values or correct any unit errors made during Initial Setup, you must re-enter the NOM Setup by...

  • Page 13: Setup: Dual Bike

    HOW TO ENTER THE NOM SETUP MODE? 1. Make sure RT/TT timers are off (press in the RT/TT Mode and will disappear) 2. Advance to the SPD/DST Mode by using 3. Press & hold & to enter the NOM Setup Mode. Important Press at any time to exit NOM Setup Mode and advance to System Check.

  • Page 14: Setup: Altimeter On/Off

    SETUP: ALTIMETER ON/OFF 1. Press to toggle between ON/OFF 2. Press to select and advance to the next Setup Mode. 3. If set to OFF, the computer will jump to the Wheel Circumference Setup Mode. SETUP: ALTIMETER MEMORY 1 1. When the far right digit begins to fl ash, press to scroll to the desired number 2.

  • Page 15: Setup: Altimeter Memory 2

    SETUP: ALTIMETER MEMORY 2 1. When the far right digit begins to fl ash, press to scroll to the desired number 2. Press to select this no. and advance to next fl ashing digit 3. Repeat for each digit until the fi nal digit 4.
  • Page 16 WHEEL SIZE CALCULATION Find your tire size and record the corresponding circumference measurement from the following chart lists. If your wheel size in not on the chart, or if you want a more precise calibration, wheel circumference may be calculated as follows: Step1: Measure the distance from the centre of the front wheel axle the ground in millimetres.

  • Page 17: Setup: Service Timer

    SETUP: SERVICE TIMER Step 1: Service Timer Interval (in hour) Service Timer will be disabled when Service Timer Interval is set to “0000” 1. When the lower far right digit begins to fl ash, press to scroll to the desired number. 2.

  • Page 18: Setup: Speed Units

    SETUP: SPEED UNITS 1. Press to toggle between KM/hr or Mile/hr 2. Press to select and advance to the next Setup Mode. SETUP: TEMPERATURE UNITS 1. Press to toggle between °C or °F. 2. Press to select and advance to the next Setup Mode. SETUP: CLOCK 1.

  • Page 19: Setup: Odometer

    SETUP: ODOMETER 1. When the far right digit begins to fl ash, press scroll to the desired number 2. Press to select this no. and advance to next fl ashing digit 3. Repeat for each digit until the fi nal digit 4.

  • Page 20: Setup: Smartlite Interval - From

    SETUP: SMARTLITE INTERVAL – FROM 1. Press to scroll from 1:00 PM to 11:00 PM 2. Press to select and advance to the next Setup Mode. SETUP: SMARTLITE INTERVAL – TO 1. Press to scroll from 1:00 AM to 11:00 AM 2.

  • Page 21: System Check

    SYSTEM CHECK ● After the last setting, the computer will automatically advance to System Check. ● System Check displays all value and unit settings chosen during Setup in sequence. ● Each screen in System Check appears for 5 seconds and blink. ●...

  • Page 22: Primary Screen Modes

    PRIMARY SCREEN MODES IMPORTANT: For VL110A T2X or Upgrade to T2X models, your computer can ONLY recognize the transmitter— Torpedo after it goes through the ID Learning procedure (see page 8, Section of HOW TO RECOGNIZE YOUR INTEGRATED T2X TORPEDO)

  • Page 23: Rt/Tt

    UPPER/ LOWER DISPLAYS DEFINITIONS ACTUAL RIDE TIME IN THE TRIP TOTAL ELAPSED TRIP TIME FORM START TO FINISH HOW TO START THE TIMERS? ● If the timers have been reset to “0:00:00”, they will start automatically when the wheel rotates. (see HOW TO RESET THE TIMERS TO “0:00:00”...

  • Page 24: Avg/Max

    UPPER/ LOWER DISPLAYS DEFINITIONS AVERAGE SPEED (km/hr or mile/hr) MAXIMUM SPEED (km/hr or mile/hr) HOW TO OPERATE? ● Starts automatically when the wheels turn and TT timer is running (see page 21, Section of RT/TT Mode). ● Updated for every 0.1 miles or Km traveled. ●...

  • Page 25: Lower Screen Modes

    SECONDARY MODE 1. Press & hold to read Average & Maximum Cadence (see page 31, Section of AVG CAD/MAX CAD Secondary Screen Mode) 2.Press to exit. LOWER SCREEN MODES UPPER/ LOWER DISPLAYS DEFINITIONS CURRENT SPEED (km/hr or mile/hr) CURRENT ALTITUDE (feet or meter) HOW TO OPERATE THE ALTIMETER? 1.

  • Page 26: Pre-Ride Altimeter Calibration

    PRE-RIDE ALTIMETER CALIBRATION Whenever you clear ride data between rides or during a ride, you must re-calibrate your Altimeter before you start riding again. Otherwise the Altimeter will not function. You could re-calibrate your Altimeter by ● Recall the Pre-set Altimeter M1 & M2 ●...
  • Page 27 B) INPUT A NEW BAROMETRIC PRESSURE Altimeter may also be calibration by entering the current, local, Barometric pressure at sea lever either in Inches of Mercury (inHg) or in Millibars (mbar). HOW TO DO THE BAROMETRIC CALIBRATION? 1) Press both simultaneously for 2 seconds in SPD/ALT Mode.

  • Page 28: Tot Alt/Max Alt

    UPPER/ LOWER DISPLAYS DEFINITIONS TOT ALT TOTAL ALTITUDE GAIN ACHIEVED (feet or meter) MAX ALT MAXIMUM ALTITUDE ATTAINED DURING THE RIDE (feet or meter) HOW TO OPERATE THE TOTAL ALTITUDE? 1. Re-calibrate the Altimeter before every ride. (see page 24, Section of PRE-RIDE ALTIMETER CALIBRATION ) 2.

  • Page 29: Clk/Odo

    UPPER/ LOWER DISPLAYS DEFINITIONS CURRENT TIME ODOMETER, CUMULATIVE DISTANCE (km or mile) HOW TO CHANGE THE CLOCK? ● See page 16, Section of CLOCK Setup. HOW DOES THE ODOMETER WORK? ● Automatically accumulate the trip distance when the wheels rotate and TT timer is running. HOW TO RESET THE ODOMETER? 1.

  • Page 30: Spd/Tmp

    UPPER/ LOWER DISPLAYS DEFINITIONS CURRENT SPEED CURRENT TEMPERATURE( °C or °F) HOW TO OPERATE? ● The Temperature will be automatically updated once per minute. HOW TO READ MAXIMUM & MINIMUM TEMPERATURE ? 1. Press & hold to read MAX TMP/MIN TMP (see page 31, Section of MAX TMP/MIN TMP Secondary Mode) 2.

  • Page 31: Stp/Id

    UPPER/ LOWER DISPLAYS DEFINITIONS INDEPENDENT STOPWATCH OPERATES IN CONJUNCTION WITH THE RT/TT TIMES INTERMEDIATE DISTANCE TRACKS AN INTERMEDIATE DISTANCE WITHIN A LONGER RIDE (km or mile) HOW TO START THE STOPWATCH? ● Press to start. HOW TO STOP? ● Press to stop and freeze data for review.

  • Page 32: Stp/Ia

    UPPER/ LOWER DISPLAYS DEFINITIONS INDEPENDENT STOPWATCH OPERATES IN CONJUNCTION WITH THE RT/TT TIMES INTERMEDIATE ALTITUDE TRACKS AN INTERMEDIATE CLIMB WITHIN A LONGER RIDE HOW TO START THE STOPWATCH? ● Press to start. HOW TO STOP? ● Press to stop and freeze data for review. HOW TO RESET THE STOPWATCH &...

  • Page 33: Secondary Screen Modes

    SECONDARY SCREEN MODES Important Flashing screen indicates the computer is displaying data in a Secondary Screen Mode. UPPER/ LOWER DISPLAYS DEFINITIONS AVG CAD* AVERAGE CADENCE (rpm) MAX CAD* MAXIMUM CADENCE (rpm) *Available until Upgrade to T2X model HOW TO ENTER THE AVG CAD/MAX CAD SECONDARY SCREEN MODE? ●...

  • Page 34: Other Features

    Auto Start up & Awake without wasting extra battery run time of the computers. ● All VL110A bicycle computers will exit Sleep Mode automatically when they receive inputs from the buttons or wheel/ crank* motion. (* T2X model only) ●...

  • Page 35: Smart Lite

    DUAL BIKE MEMORY( I II ) ● VL110A can be calibrated for two bicycles. It will store separate Torpedo ID*, Wheel Size, Service Timer, Odometer, as well as different formats selected for Time, Temperature, Speed and Distance. (*T2X model only) ●...

  • Page 36: Speed Comparator

    SPEED COMPARATOR (▲▼) ● The Speed Comparator symbols indicate whether current Speed is above or below Current Average Speed. ● A positive (▲) or negative (▼) symbol appears in the upper left apart of the screen in all primary screen modes. ●...
  • Page 37 UPPER/ LOWER DISPLAYS DEFINITIONS LO HEAD Low Battery of Head Unit LO SENS Low Battery of Torpedo LO ALL Low Battery of Head Unit and Torpedo FOR T2X MODEL: ● Illuminate and stay “on” Wrench icon indicates low battery power in the Head Unit or Torpedo. ●...

  • Page 38: Freeze Frame Memory

    FREEZE FRAME MEMORY ● 5 primary screens (SPD/DST, RT/TT, AVG/MAX, SPD/ALT, TOT ALT/MAX ALT) will be frozen for review at any point during a race or training ride. HOW TO SAVE? 1. Press & hold in any Primary Screen Mode. 2.

  • Page 39: Reset

    RESET RIDE DATA RESET 1. Clear the current ride data (DST, RT, TT, AVG & MAX SPD, AVG & MAX CAD*, MAX & MIN TMP, STP, ID) to Zero. (*T2X model only) 2. Press for 2 seconds in any Primary Screen Mode except STP/ID or STP/IA , with the RT/TT timers turned off. STOPWATCH AND INTERMEDIATE DISTANCE RESET 1.

  • Page 40: Trouble Shooting

    Check to be sure RT and TT are activated. ● Current speed-reading is erratic or does not appear. (VL110A HD) Inspect the wiring for any breaks or kinks. Replace the mounting bracket and sensor as needed.
  • Page 41 ● Screen reading is weak or fading. Symptom of interference or a weak battery. Replace the battery. ● Screen readings are erratic and read too high or too low. Symptom of a weak battery. Replace the battery. ● Screen “frozen”, no response to buttons. Symptom of a weak battery.

  • Page 42: Technical Specifications

    Barometer Integrated T2X Torpedo: CR123A, 3-Volt battery. mbar Head Unit: 12 or 24 hr format, Clock (CLK) VL110A HD: 30 months hours and minutes displayed. Battery Run Time VL110A WL: 20 months (1 hour training/ VL110A T2X: 18 months Service Timer Limit: 1~1999 hrs.

  • Page 43: Warranty Policy

    1. Prior to shipping an item back, you must fi rst obtain a Return Authorization Number (s) (RA#). Each item being returned must have an individual RA#. 2. To obtain an RA #, you must either contact the retailer where the product was originally purchased from, or contact VETTA directly at customerservice@vetta.com.

  • Page 44: Customer Service Centers

    Please check the web to help answer any question and service manual. CUSTOMER SERVICE CENTERS Acumen Inc. 101A Executive Dr., Suite 100, Sterling, VA 20166, USA. Acumen Europe BV Splijtbakweg 117, 1333 HJ, Almere, The Netherlands. E-Mail: customerservice@vetta.com Website: www.vetta.com...

Table of Contents