Vetta V100A Manual page 25

SETUP: BIKE I & BIKE II
In the Initial Setup mode, after the master
screen stops flashing, the screen displays the
letters "bic no". The default setting is Bike "I".
To toggle between Bike I and Bike II settings,
press Button #2. With Bike "I" icon flashing,
press Button #1 to select it and advance to the
next Setup screen. Note: When programming
a second bike in Initial Setup, scroll to "II",
select it, and advance as instructed above.
The V100A computer will retain the values
and settings entered for Bike II independently
of Bike I.
SETUP: ALTITUDE UNITS
After the bike number has been selected, the
Initial Setup program automatically advances
to the Altitude Units Setup screen. The default
setting for Altitude units is feet (ft). To confirm
you want to see altitude readings in feet, press
Button #1 to select that value and advance to
the next Setup screen. To choose meters (m)
instead as the unit of altitude you wish to
use, press Button #2 to toggle to that value
("m" will flash), then press Button #1 to
select it and advance.