Head Unit - Vetta V100A Manual

Head Unit

Wired
Mounting Bracket
Mounting Pad
Zip Tie
Handlebar
Fig. 7
HEAD UNIT
The V100A head unit is designed to slide into the mounting
bracket from the front to the back and lock into position. You
should hear an audible "CLICK" when the head unit has been
properly locked into position. This indicates proper alignment
between the computer head pins and the mounting bracket
contacts. To remove the computer head from the bracket, gently
pinch the two locking tabs inward and slide the head unit
forward and out of the bracket. (Fig. 8)
Fig. 8
OUT
Head Unit
IN
Locking Locking
Tab Tab
UNLOCK UNLOCK
Wired Mounting Bracket