Head Unit - Vetta V100A Manual

HEAD UNIT

The head unit is designed to slide into the wireless active mount
from the front to the back and lock into position. You should hear
an audible "CLICK" when the head unit has been properly locked
into position. This indicates proper alignment between the
computer head pins and the active mount contacts. To remove
the computer head from the mount, gently pinch the two locking
tabs inward and slide the head unit forward and out of the
mount. (Fig. 16)
Locking
Tab
UNLOCK
Wireless Active
OUT
IN
Mount
Head Unit
Locking
Tab
UNLOCK
Fig. 16