Primary Screen Modes; Upper Screen Modes; Spd/Dst - Vetta VL110A Manual

PRIMARY SCREEN MODES

ENG
IMPORTANT: For VL110A T2X or Upgrade to T2X models, your computer can ONLY recognize the transmitter—
Torpedo after it goes through the ID Learning procedure (see page 8, Section of HOW TO RECOGNIZE YOUR
INTEGRATED T2X TORPEDO)

UPPER SCREEN MODES

20
UPPER/ LOWER DISPLAYS
SPD
DST
HOW TO OPERATE?
●
Starts automatically when the wheels turn and TT timer is running (see page 21, Section of RT/TT
Mode).
●
Stops automatically when the wheels stop.
HOW TO RESET TRIP DISTANCE TO ZERO?
●
Press for 2 seconds in any Primary Screen Mode except STP/ID or STP/IA , with the RT/TT
3
timers turned off.
Important
DST will automatically reset after the maximum trip distance (999.9) is achieved.
DEFINITIONS
CURRENT SPEED (km/hr or mile/hr)
CURRENT TRIP DISTANCE (km or mile)