Button Functions; Setting Miles/Hour Of Kilometers/Hour - Vetta c-500 Owner's Manual

BUTTON FUNCTIONS

"B"
"A"
PROGRAMMING THE HEAD OF THE COMPUTER
Now that you are familiar with the features of your Vetta cycle computer, you are ready to begin programming
the unit specifically for your bike. Take a few minutes to familiarize yourself with the buttons and keystroke
sequences before you proceed to the programming of the unit.
SETTING MILES/HOUR OR KILOMETERS/HOUR
"A" BUTTON (BOTTOM)
Controls progressing through functions and settings, and advances the screen
while programming the computer.
"B" BUTTON (TOP)
Controls advancing through the digits while programming the computer and
activating the Freeze Frame memory function.
All Vetta cycle computers are capable of being programmed to read out in either
miles or kilometers. It is also possible to change back and forth between miles
and kilometers by simply reentering the setting program and changing your
choice of measurements.
STEP 1
With the computer in the
STEP 2
The screen will clear and the
Size Setting of 2074mm (700 x 20c). Press the upper key (B) to select either miles
( ) or kilometers (
STEP 3
Set your choice and advance to the wheel size setting mode by pressing the lower
key (A) again.
/ mode, press the lower key (A) for over 2 seconds.
icon will flash along with the Default Wheel
).