Aileron Linkage - Seagull Models PC-9 Assembly Manual

Thread.
! 4) Tape the servo lead to the wing to pre-
vent it from falling back into the wing.
Plastic tape.
! 5) Reinstall the servo into the servo mount
and secure the servo inplace using the wood
screws provided with you radio system.
Repeat the procedure for the other wing
half.
www.seagullmodels.com

AILERON LINKAGE.

! 1) Using a ruler & pen to draw a straight
line as below picture.
Straight line.
!
2) Locate the two nylon control horns,
two nylon control horn backplates and four
machine screws.
!
3) Position the aileron horn on the bottom
side of aileron. The clevis attachment holes
should be positioned over the hinge line.
2mm X 20mm.
Mounting Screws.
Pen.
Control Horn.
Mounting Plate.
7