Xerox Document Centre 706 Series User Manual page 81

G You can use LM below XY on the
display to increase or decrease the
ratio of X and Y simultaneously.
G Select Cancel to cancel the settings.
G Chapter 3 Loading Documents for
information on how to load
documents.
G Set the document orientation
correctly because if it is different
from the orientation of original
loaded, XY is different and their
reduction or enlargement becomes
different as a result.
See 5-10 Selecting the Original
Orientation (Original Orientation) for
details.
G Some features cannot be selected
together with this feature. See
Appendix B Possible Combinations
of Features for details.
Enter the X and Y ratios by using LM.
For example, enter Y = 120% and X = 200%.
Load the original in the orientation of Head to Top, or Head to
Left.
Select the corresponding document orientation of the original
loaded.
Select Head to Top or Head to Left.
Select Save twice.
Select other features if necessary.
Enter the required number of sets by using the keypad and
press Start.
The copies are made according to the ratios specified in Step 4.
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%)
G G
Basic Features
4
57