Changing The Paper Tray Size; Changing The Size Of Tray 1 - Xerox Document Centre 706 Series User Manual

G G
Loading Paper

Changing the size of tray 1

2
G 2.1 What Paper to Use for
information on the types of paper
stock that can be used.
G Original/Paper Size Sensing of 6.1
List of Custom Preset Functions for
information on the Tools Mode
screen.
G Paper jam may occur if the paper
size has not been changed correctly.
26

2-4 Changing the Paper Tray Size

Changing the Paper Tray Size

Follow the procedures shown below to change the size of tray 1 in order to
load paper stock of the desired size.
For changing paper size A5
Mode screen.
Procedure
Pull tray 1 out until it stops.
When pulling out a
paper tray, do it
slowly. If pulled out
with too much force,
the tray can hit and
injure your knees.
Remove any paper still in
the tray.
Pinch and hold the release
on the lever as shown in
the diagram. Then push
the lever to the rear of the
tray.
5.5 x 8.5", you have to do it via the Tools