Loading Paper; Loading Paper In Trays 1 To 4 - Xerox Document Centre 706 Series User Manual

G During a copy job, paper can be
added to a tray not selected for the
current job that is in progress.
G The multi-tray feature is not
available on some models.

Loading paper in trays 1 to 4

G When tray 2 is the multi-tray, see
Loading paper in the multi-tray for
details.
G The capacity of tray 1 is 1000 sheets
while trays 2 to 4 each has a
capacity of 550 sheets.
G Do not load paper above the Max fill
line.

Loading Paper

The following screen will appear when paper runs out during a copy job.
Add paper according to the displayed instructions. After adding the paper,
you can resume the copy job by pressing the Start button.
This section will show you how to add paper to trays 1 to 4, the multi-tray,
tray 5 (bypass), and tray 6 (high capacity feeder).
Add paper to trays 1 to 4 according to the procedures shown below.
Procedure
Pull out the empty tray until
it stops.
When pulling out a
paper tray, do it
slowly. If pulled out
with too much force,
the tray can hit and
injure your knees.
Align and load the paper
stock against the right side
of the tray with the side
where the image is to be
copied facing upwards.
G G

Loading Paper

2
21
2-3 Loading Paper