Xerox Document Centre 706 Series User Manual page 264

G
Using the Auditron Feature
G Review CE Data is used only by
Xerox Customer Engineer.
G To change the access number
setting, select Reset or the Clear C
button.
G Define the access number within the
range of 4 to 12 digits.
9
G The default screen is displayed if
Auditron Mode is not enabled.
9-8 Changing the Auditron Access Number
240
G
Select Change of Access No.
Enter the new access number and select Enter.
Enter the same number again for confirmation and select
Enter.
Select Close.
Select Exit Auditron.
The Password Entry screen is displayed.