Xerox Document Centre 706 Series User Manual page 47

G Tray (2-3) cannot be lifted.
G Do not load paper above the Max fill
line.
G Load paper of the same size as the
tray. Also, check that the paper
guide touches the paper, and the
right edge of the paper touches the
edge of the tray.
E.g.: When loading in tray (2-2)
Load paper
below this.
2-2
G Load perforated paper with the holes
toward the back of the tray.
G Be sure to return tray (2-1), and (2-
2) to their original positions after
they have been lifted.
The multi-tray consists of three trays with (2-1) on the top level followed by
(2-2), and (2-3).
For the first tray (2-1), lift
its transparent cover. To
access the second and
third trays (2-2 and 2-3
respectively), lift its
previous tray.
Align and load the medium
against the left side of the
tray with the side where
the image is to be copied
facing upwards.
Return the cover or the
tray to its original position.
If necessary, you can load the
medium into the other trays in the
same way.
Push the multi-tray in
slowly until it stops.
G G
Loading Paper
2
23
2-3 Loading Paper