Stopping A Copy Job - Xerox Document Centre 706 Series User Manual

ÅúBasic FeaturesÅú
G If there is an Auto Start copy job, the
4
Auto indicator light on the top left of
the Start button will be lit.
G If the copy in progress screen is
displayed, select Stop on the screen
to halt the copy operation.
G To resume copying after a copy job
has been stopped, press Start.
G If there are copy/print jobs, which
have been temporarily stopped
(waiting for operation), you cannot
proceed with the next copy job.
Press Job Status
the job status of the stopped job
(waiting for operation). To resume
the stopped job, select it, and press
Start. To cancel it, press Clear C or
Clear All.
80

4-11 Stopping a Copy Job

Stopping a Copy Job

To stop a copy job, pressing Stop will stop the job temporarily. Press Clear
C or Clear All after that to stop the copy job.
Procedure
Press Stop.
The current copy job is stopped temporarily. The screen below is displayed. A
waiting copy job that uses the Auto Start feature is also stopped temporarily.
Press Clear C or Clear All.
Stop to display
The copy job is stopped.
or