Xerox Document Centre 706 Series User Manual page 130

G G
Added Features
G Chapter 3 Loading Documents on
how to load documents.
G The screen on the right has the
finisher installed.
5
G The factory default is No
Separators.
G Select Cancel to cancel the settings.
G Paper for separators/distribution
copies must be of the same size as
the transparencies (select either A4
or 8.5 x 11").
G The factory default is Tray 5
(Bypass) for transparencies. The
default can be changed by using
Tools Mode screen.
106 5-9 Interleaving Blank Sheets between Transparencies (Transparency Separators)
Procedure
Load the document.
Select Features Menu. Then select Transparency
Separators.
Select Blank Separators. When making distribution copies at
the same time, select Blank Sep & N Sets.
For example, select Blank Sep & N Sets.
Confirm the selection of the tray loaded with transparencies
and the tray containing paper to be used as separators.
To change tray settings, select Paper Tray Settings.
(If not changing tray settings, proceed to Step 6.)