Cleaning The Dadf Film/Roller Sections - Xerox Document Centre 706 Series User Manual

Cleaning the DADF film/roller sections

G If the film and roller sections of the
DADF are dirty, they will cause
document jams and result in dirty
copies being made.
G Plastic and painted parts may be
damaged if you use benzine or
thinner to clean the machine.
G If too much water is used, it will
damage the document or cause the
machine to fail.
G Use a cloth that has been wrung
thoroughly and does not drip. Water
droplets seeping into the machine
will cause it to fail.
Use a dry cloth made of soft material to wipe.
Put the DADF slowly back
in place.
Procedure
Press the lever at the
centre of the DADF to
open the cover.
Cover will be stationary
when fully open.
Lift the lever with the green
seal to open the inner
cover.
Use a moistened and soft
cloth to clean the rollers
(total 18). Clean them by
gently turning the rollers
with the cloth.
G G
Daily Care
8
8-1 Cleaning the Copier 201