Replacing The Dry Ink Waste Container - Xerox DocuColor 12 System Administration Manual

Replacing the Dry Ink Waste Container

When a message is displayed to replace a Dry Ink
Waste Container (Figure 14), follow the
instructions provided on this page in addition to
those on the labels surrounding the Dry Ink Waste
Container and affixed to the copier/printer.
CAUTION:To prevent spilling dry ink (toner),
remove the Dry Ink Waste Container only when
the "Dry Ink Waste Container is Full" message
appears on the Touch Screen.
1
Open the Front Door of the copier/printer.
2
Place a few sheets of paper on the floor under the
Dry Ink Waste Container to catch any dry ink
(toner) that may spill.
3
Locate the Waste Container (area A in Figure 15)
in the upper left of the printer/copier.
DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE
Figure 14: Dry Ink Waste Container message
Figure 15: Locating the old
Dry Ink Waste Container
4–9
1
2
3
4
5
6
7
MAINTENANCE