Settings That Can Be Changed Or Confirmed While Printing - MUTOH ValueJet VJ-1604 Quick Reference

VJ-1604 QUICK REFERENCE
3.7.4.2

Settings that can be changed or confirmed while printing

NOTE NOTE
• The Print start menu is displayed only when the printer is warming up.
• When you change a setting during operation, be sure to select "Backup" to save the
setting that you changed.
If the printer returns to Normal without "Backup" being selected, the changed setting
is not saved.
Setup item
Print Start
Temperature
Pre Heater
Platen Heater
After Heater
PF Adjust
Backup
3-28
Setting
—
Pre
Platen
After
Off / 30° C to 50° C
Off / 30° C to 50° C
Off / 30° C to 50° C
–20 pulse to 0 to 20 pulse
—
—
Description
• [Enter] key: If the heater temperature does not reach
the set value during warming-up, printing starts.
Check the current Pre Heater temperature.
Check the current Platen Heater temperature.
Check the current After Heater temperature.
Change the Pre Heater temperature.
Change the Platen Heater temperature.
Change the After Heater temperature.
Change the feed adjustment value.
• [Enter] key: Save the changed setting.
• [Cancel] key: The printer returns to Normal.
3 Basic usage