MUTOH ValueJet VJ-1604 Quick Reference page 98

VJ-1604 QUICK REFERENCE
No.
3 When the media is set, does it curl
upward?
4 Is the printer used in an environment
other than the one specified, such as
near an air conditioner?
5 Are you using media that has been
printed on already?
(4) Media jams frequently occur
NOTE NOTE
• If media other than the recommended one is used, correct media feeding cannot be
assured.
No.
1 Are you using the recommended
media?
2 Is the media used in an environment
other than the one specified?
3 Are you using the old media?
4 Are you using the folded or wrinkled
media?
5 Does the media bend?
(5) The media veers during printing
No.
1 Are you using the recommended
media?
2 Is the loading position of the media
correct?
3 Is the roll media set correctly?
5-16
Possible cause
Possible cause
Possible cause
Remedy
Straighten the media or set a new media.
Only use the printer in an environment that
is specified for use.
Use a new media.
Remedy
Use the recommended media.
Use the media in a dedicated environment.
Replace it with new media.
Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Remedy
Use the recommended media.
Set the media correctly.
Set the roll media correctly.
Reference
3.5.2 Setting roll
media
3.5.1 Loading roll
media
"4.2.1 Media
type" in the Operation
Manual
Reference
"4.2.1 Media
type" in the Operation
Manual
"4.2.2 Cautions
on handling media" in
the Operation Manual
"6.1.2 Replacing
roll media" in the
Operation Manual
"4.2.1 Media
type" in the Operation
Manual
"5 Panel setup
menu" in the
Operation Manual
Reference
"4.2.1 Media
type" in the Operation
Manual
3.5.2 Setting roll
media
3.5.1 Loading roll
media
5 Troubleshooting