MUTOH ValueJet VJ-1604 Quick Reference page 56

VJ-1604 QUICK REFERENCE
4. The setting in the blinking part on the LCD monitor of the operation panel can be changed.
Press the [+] key or [–] key to change the setting.
5. To save the changed setting, press the [Enter] key on the operation panel.
• The setting is saved and the next setup item is displayed.
NOTE NOTE
• If you press the [Cancel] key, [+] key or [–] key without pressing [Enter] key after
changing a setting, the change will not be saved.
6. Press the [Cancel] key on the operation panel to exit from the setup.
• The previous setup menu is displayed.
• When the main menu is displayed, the screen turns to Normal.
3-30 3 Basic usage