4.1.2
Replacing the flushing-box sponges
This section explains how to replace the flushing-box sponges.
(1) Replacement time
Replace the flushing-box sponges in the following situations.
a. When the flushing-box sponge becomes deformed
b. When smears of ink appear on media
c. Two months after replacement
(2) Type
TIP
•
For types and details of the flushing-box sponge, refer to "8.3 Supply list" in the
Operation Manual.
(3) Replacing steps
Follow the steps below to replace the flushing-box sponges.
1. If the printer is turned ON, make sure the following.
•
Printing or other operations are not in progress.
•
The operation panel display is Normal.
2. Open the front cover.
1
No.
1
4 Daily maintenance
Front cover
Name
VJ-1604 QUICK REFERENCE
4-5