MUTOH ValueJet VJ-1604 Quick Reference page 13

VJ-1604 QUICK REFERENCE
When you do not use the printer for a long period, make sure to pull out the power plug from the
power socket for safety.
Make sure to connect an earth wire to the earth connection that meets the following standards.
• Earth terminal of power socket
• Earth wire with copper plate which is buried at 650 mm or more, deep in the ground.
Keep the work area well-ventilated. This prevents fire, and stops operators from feeling sick from
bad air.
When printing is finished, the media guide is at high temperature. Wait until the media guide cools
off.
Pay attention to the following points when you cut roll media. Mishandling the razor blade may
cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
When cleaning the printer, be sure to turn OFF the power and disconnect the power plug.
Move the printer maintaining a horizontal position.
1 Safety instructions 1-5