Error Messages; Status Messages - MUTOH ValueJet VJ-1604 Quick Reference

5.4

Error messages

This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
5.4.1

Status messages

This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No.
1 Ready to Print
2 Media End
3 Receiving
4 Converting
5 Printing
6 Warming Up
7 Cleaning **%
8 Start Ink Charge – >E
9 Ink Refill
10 Washing
11 Moving Origin Pos.
12 Confirm Position – >E
13 Remove Cartridges
14 ** Initialing **
15 ** Press 2sec. **
16 Insert CleaningCart.
17 Insert InkCartridges
18 Media: Type ** OK?
19 Media Initial
5 Troubleshooting
Display
Standby (Media is loaded).
Standby (Media is loaded).
Receiving data.
Analyzing data.
Under printing.
Warming up the heater.
Cleaning the head. Please wait a while.
Ink filling starts. Press the [Enter] key.
**% Filling the ink. Please wait a while.
Washing the print head by Head washing.
Please wait a while.
The print head is moving to the original
printing position in the Origin setup menu.
Please wait a while.
The print head is moving to the original
printing position in the Origin setup menu.
Press the [Enter] key.
Washing the head.
Attach the cleaning cartridge.
Initializing the setting in the Initialization
menu. Please wait a while.
The [Cleaning] key or the [Nozzle Check]
key is pressed for less than 2 seconds. Press
the key for more than 2 seconds again.
Filling the ink.
Attach the cleaning cartridge.
Filling the ink.
Insert an ink cartridge.
Initializing the media.
Please wait a while.
(** represents the setup media type.)
VJ-1604 QUICK REFERENCE
Description
cleaning
cartridges
cartridges
menu" in the
Operation Manual
menu" in the
Operation Manual
menu" in the
Operation Manual
menu" in the
Operation Manual
menu" in the
Operation Manual
panel
menu" in the
Operation Manual
cartridges
media type" in the
Operation Manual
Reference
—
3.5 Setting media
—
—
—
—
4.2.3 Head
3.4 Installing ink
3.4 Installing ink
"5 Panel setup
"5 Panel setup
"5 Panel setup
"5 Panel setup
"5 Panel setup
2.1.3 Operation
"5 Panel setup
3.4 Installing ink
"3.4.4 Setting
5-19