Settings That Can Be Changed Or Confirmed While Printing - MUTOH vj-1617h Operation Manual

Handling the printer
4.4.4.2

Settings that can be changed or confirmed while printing

NOTE
• When you change a setting during operation, be sure to select "Backup" to save the setting that you
changed.
If the printer returns to Normal without "Backup" being selected, the changed setting is not saved.
• Check the following before using the Job status items
• The values displayed in the Job status items are rough indications.They do not guarantee the
strict accuracy.
• If the length information is not included in the print data, "0" is displayed for all items.
• You can check the "remaining print" and "remaining time" in the way described in
4.4.4.2 Settings that can be changed or confirmed while printing
• To check the information about the printed data, refer to the following.
5.10 Job Status Menu
Setup item
PF Adjust -5.00% to 0.00% to
5.00%
Backup
Job Statsus ToDo Length
Done
Remain
Remain Time
—
Setting
Change the feed adjustment value.
- • [Enter] key: Save the changed setting.
• Check the whole length of the data (media feed direction) currently being
printed.
• Check the printed length of the data currently being printed.
• For the data currently being printed, check the length of the data that has
not been printed.
• Displays the time remaining for printing.
— • [Cancel] key: The printer returns to Normal.
VJ-1617H OPERATION MANUAL
Description
4-26
.