Settings That Can Be Changed Or Confirmed While Printing - MUTOH VJ-1638 Operation Manual

VJ-1638/1638W OPERATION MANUAL

4.4.5.2 Settings that can be changed or confirmed while printing

NOTE NOTE
When you change a setting during operation, be sure to select "Backup" to save the setting that you
changed.If the printer returns to Normal without "Backup" being selected, the changed setting is not
saved.
Before using the Job Status items, please check the followings.
The values displayed in the Job Status are just standard values, not guarantee the accuracy.
If the print data includes no length data, all information will be displayed as "0".
The "Remain" and "Remain Time" information can be checked in "4.4.8 Normal Display while Printing".
To check the information of printed data, please refer to the below.
"5.8 Job Status menu"
Setup item
Temperature
（VJ-1638 only）
Pre-heater
(VJ-1638 only)
Platen heater
(VJ-1638 only)
Dryer
(VJ-1638 only)
PF Adjust
Backup
Job Status
-
VJ1638xE-A-01c
Setting
Pre
Platen
Dryer
Off / 30ºC～50ºC
Off / 30ºC～50ºC
Off / 30ºC～50ºC
-5.00%～0.00～5.00%
-
ToDoLength
Done
Remain
Remain Time
-
Description
Checks the current
temperature of Pre-heater.
Checks the current
temperature of Platen
heater.
Checks the current
temperature of Dryer.
Changes the temperature
of Pre-heater.
Changes the temperature
of Platen heater.
Changes the temperature
of Dryer.
Change the feed
adjustment value.
• [Enter] key: Save the
changed setting.
Checks the length of data
currently printing (media
feeding direction).
Checks the already printed
length of data currently
printing.
Checks the remaining
length of data currently
printing.
The remaining time to
complete the printing will
be displayed.
• [Cancel] key: The printer
returns to
Normal.
19
ERRATA
Reference
-
5.1.1.1.4 Pre-heater
menu (VJ-1638 only)
5.1.1.1.5 Platen
Heater
menu (VJ-1638 only)
5.1.1.1.6 Dryer menu
(VJ-1638 only)
5.1.1.1.3 Media feed
compensation
-
-
-
-
-
-
October 2012
MUTOH INDUSTRIES LTD.