Settings That Can Be Changed Or Confirmed While Printing - MUTOH ValueJet 1608 HS User Manual

Settings that can be changed or confirmed while printing

Note
Setup item
Print Start
Temperature
Pre Heater
Platen Heater
After Heater
Air heater
PF Adjust
Backup
AP-75810 - Revision 2.0
Downloaded From ManualsPrinter.com Manuals
The Print start menu is displayed only when the printer is warming up.

When you change a setting during operation, be sure to select "Backup" to

save the setting that you changed.
If the printer returns to Normal without "Backup" being selected, the changed

setting is not saved.
Setting
Pre
Platen
After
Off / 30 °C to 50 °C
Off / 30 °C to 50 °C
Off / 30 °C to 50 °C
Off / 130°C to 190°C
–20 pulse to 0 to 20
pulse
User's Guide ValueJet 1608 HS
Description
Enter : If the heater temperature does
— not reach the set value during
warming-up, printing starts.
Check the current Pre Heater
temperature.
Check the current Platen Heater
temperature.
Check the current Drier temperature.
Change the Pre Heater temperature.
Change the Platen Heater temperature.
Change the Drier temperature.
Change the air heater
Change the feed adjustment value.
— ENTER : Save the changed setting.
— CANCEL : The printer returns to Normal.
Printer menu
5
97