Rear Section - MUTOH ValueJet VJ-1604 Quick Reference

No.
10 Maintenance cover
11 Waste fluid valve
12 Adjuster
13 Media holder plate
2.1.2

Rear section

3
1
5 6 7
No.
1 Roll media holders
2 Media feed slot
3 Ink cartridge slot
4 Media guide
5 AC inlet
6 USB connector
7 Network interface connector
2 Product overview
Name
Used to prevent the user from touching the inner mechanical section.
Open and close in the following cases.
• When cleaning the cleaning wiper
• When cleaning around the print head
It is normally closed.
Open and close when discharging the waste fluid from the waste fluid tank.
It is normally closed.
Used to install the printer horizontally.
Installed inside of the front cover.
By attaching media holder plates to both sides of the media, it is possible to
prevent warpage.
Name
Used to load the roll media.
Include flanges where roll media is attached, and the levers that fix the roll
media holders.
Used for feeding media.
Insert the ink cartridge.
Used for feeding media smoothly when the media is set or printed.
The heater (pre heater) to warm media is installed.
Used for connecting the power cable.
Not used for this printer.
Connects a network interface cable.
VJ-1604 QUICK REFERENCE
Function
4
1
Function
2
2-3