4 Handling the printer
4.4.5.2
Settings that can be changed or confirmed while printing
NOTE
• When you change a setting during operation, be sure to select "Backup" to save the setting that you
changed.
If the printer returns to Normal without "Backup" being selected, the changed setting is not saved.
Setup item
Temperature
Pre heater
Platen heater
Dryer
PF Adjust
Backup
4.4.6
Pausing printing
It is possible to pause to print during printing.
Follow the procedure below to pause or restart printing.
NOTE
• If the printing is paused, the print quality will not be guaranteed.
1. Check that the printer is in operating.
2. Press the [Pause] key on the operation panel.
Setting
Pre
Platen
Dryer
Off / 30 °C to 50 °C
Off / 30 °C to 50 °C
Off / 30 °C to 50 °C
-5.00%~0.00~5.00%
—
—
VJ-1624 OPERATION MANUAL
Description
Checks the current temperature of the pre-heater.
Checks the current temperature of the platen heater.
Checks the current temperature of the dryer.
Changes the temperature of the pre-heater.
Changes the temperature of the platen heater.
Changes the temperature of the dryer.
Change the feed adjustment value.
• [Enter] key: Save the changed setting.
• [Cancel] key: The printer returns to Normal.
4-26