Warning Labels; Handling The Warning Labels; Location And Type Of Warning Label - MUTOH ValueJet VJ-1604 Quick Reference

VJ-1604 QUICK REFERENCE
1.3

Warning labels

This section explains the handling of warning label, pasting location and types.
Warning labels are attached to parts of the printer that need special caution. Understand the locations and
the descriptions of the danger associated with each label before operating the printer.
1.3.1

Handling the warning labels

When handling the warning labels, be careful about the following points.
NOTE NOTE
• Check whether all the warning labels can be read. If the letters or illustrations on the
label are not clear, remove the dirt from the label.
• Use cloth, water and neutral detergent for removing dirt from the warning label. Avoid
either organic solvents or gasoline.
• It is necessary to replace the labels if they are damaged, lost or illegible.
If the warning labels have to be replaced, contact your local MUTOH dealer.
1.3.2

Location and type of warning label

Pasting locations of the warning labels are shown in the following figure.
6
1-6
5 4 3 2 1
6
9
8
1 Safety instructions