MUTOH ValueJet VJ-1604 Quick Reference page 31

CAUTION
• Pay attention to the following points when handling the power supply plug. Any
mishandling of the power cable could cause a fire.
• Make sure that no foreign substances such as dust etc. are stuck to the power
plug.
• Make sure that the power plug is firmly inserted to the edge of the power
socket.
• When you do not use the printer for a long period, make sure to pull out the power
plug from the power socket for safety.
• Make sure to connect an earth wire to the earth connection that meets the
following standards.
• Earth terminal of power socket
• Earth wire with copper plate which is buried at 650 mm or more, deep in the
ground.
NOTE NOTE
• Contact the retail outlet of purchase if the earth connection cannot be established,
or if the earth connection is not given.
• When the power supply of the printer is ON, do not pull out the power cable from
the power socket.
Whenever the plug is pulled out from the power socket, allow one minute or more
before inserting the plug in the power socket again.
• To use the two power cables plugged in the inlets, a total capacity of 17 A or over
is required.If the power source cannot supply the required capacity, plug the two
power cables in the different power sources respectively.
No.
1
3 Basic usage
Power plug
1
Name
VJ-1604 QUICK REFERENCE
3-5