Settings; Introduction To Settings - Danfoss ECL Comfort 210 Installation Manual

Installation Guide ECL Comfort 210 / 310, application A260

5.0 Settings

5.1 Introduction to Settings

Descriptions of settings (parameter's functions) are divided into
groups as used in the ECL Comfort 210 / 310 controller's menu
structure. Examples: "Flow temperature", "Room limit" and so on.
Each group starts with a general explanation.
The descriptions of each parameter are in numeric order, related to
the parameter's ID numbers. You might come across differences
between the order in this Installation Guide and the ECL Comfort
210 / 310 controllers.
You might also come across navigation hints which are not present
in your application.
The note "See Appendix ..." refers to the Appendix at the end
of this Installation Guide, where parameter's setting ranges and
factory settings are listed.
The navigation hints (for example MENU > Settings > Return limit
... ) cover multiple subtypes.
Some parameter descriptions refer to Duct or Flow or Inlet
temperature because the parameters in question are used in other
applications too.
Danfoss District Energy
VI.LG.F2.02 DEN-SMT/DK 45