Danfoss ECL Comfort 210 Installation Manual page 3

Installation Guide
The B-types have no display and dial. The B-types are operated by
means of the Remote Control unit ECA 30 / 31:
• ECA 30 (087H3200)
• ECA 31 (087H3201)
Base parts for ECL Comfort:
• for ECL Comfort 210, 230 volt (087H3220)
• for ECL Comfort 310, 230 volt and 24 volt (087H3230)
Additional documentation for ECL Comfort 210 and 310, modules
and accessories is available on http://den.danfoss.com/.
Documentation for ECL Portal: See ecl.portal.danfoss.com.
Danfoss District Energy
ECL Comfort 210 / 310, application A260
Safety Note
To avoid injury of persons and damages to the device, it is absolutely
necessary to read and observe these instructions carefully.
Necessary assembly, start-up, and maintenance work must be
performed by qualified and authorized personnel only.
Local legislations must be respected. This comprises also cable
dimensions and type of isolation (double isolated at 230 V).
A fuse for the ECL Comfort installation is max. 10 A typically.
The ambient temperature range for the ECL Comfort in operation is
0 - 55 °C. Exceeding this temperature range can result in malfunctions.
Installation must be avoided if there is a risk for condensation (dew).
The warning sign is used to emphasize special conditions that should
be taken into consideration.
This symbol indicates that this particular piece of information should
be read with special attention.
Application keys might be released before all display texts are
translated. In this case the text is in English.
VI.LG.F2.02 DEN-SMT/DK 3